Graco Husky 716 3/4" Air-Operated Double Diaphragm Pump - 24N260
SKU
24N260
$2,034.90 $1,695.75
3/4 Inch Positive Displacement Double Diaphragm Pump
The Husky 716 has a 3/4 inch (19.05 mm) connection and is available in aluminum and stainless steel
The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.
Features
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Benefits
- Center and end porting options
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Husky 716 Performance
Overview
| Maximum Fluid Flow: | 16 gpm (61 l/min) |
| Maximum Fluid Discharge Pressure: | 100 psi (7 bars, 0.7 MPa) |
| Maximum Size Pumpable Solids: | 3/32 in (2.5 mm) |
| Fluid Displacement Per Cycle: | 0.04 in (0.64 litres) |
| Max. Flow Rate (l/min) | 61.00 |
|---|---|
| Max. Input Pressure (psi) | 100 |
| Max. Output Pressure (psi) | 100.00 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 1/4" NPT(F) |
| Pump Inlet/ Outlet Size | 3/4" NPT(F) |
| Max. Pump Speed | 400 cpm |
| Fluid Section Material | Stainless Steel |
| Centre Section Material | Polypropylene Standard Air Valve (NPT) |
| Porting | Stainless Steel Standard Porting (NPT) |
| Seats | Acetal |
| Balls | PTFE |
| Diaphragms | PTFE Overmoulded |
| Manifold O-Rings | PTFE |
| Certification Required | ATEX |