Graco Husky 515 1/2" Air-Operated Double Diaphragm Pump - D4A311

SKU
D4A311
$1,177.85 $981.54
Overview
Acetal Fluid Section, Polypropylene Remote Centre Section, Stainless Steel Seats, PTFE Balls, PTFE Diaphragms, PTFE O-Rings

1/2 Inch Positive Displacement Double Diaphragm Pump

The Husky 515 has a 1/2 inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.


Benefits of the Husky 515 Double Diaphragm Pump

  • Center and end porting options.
  • No mechanical seals to cause fluid leaks or failures
  • Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks
  • Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
  • Split manifold option to pump multiple fluids without mixing

1/2 Inch Positive Displacement Double Diaphragm Pump

The Husky 515 has a 1/2 inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.


Features

  • Fully-groundable acetal model
  • Delivery up to 15 gpm (56.7 lpm)
  • Easy-to-service air valve and ball checks
  • Reliable air valve for years of dependable performance

Benefits

  • Center and end porting options.
  • No mechanical seals to cause fluid leaks or failures
  • Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks
  • Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
  • Split manifold option to pump multiple fluids without mixing

Performance

Overview

Maximum Fluid Flow: 15 gpm (57 l/min)
Maximum Fluid Discharge Pressure: 100 psi (7 bars, 0.7 MPa)
Maximum Size Pumpable Solids: 3/32 in (2.5 mm)
Fluid Displacement Per Cycle:0.04 g (0.15 litres)
More Information
Max. Flow Rate (l/min) 57
Max. Input Pressure (psi) 100
Max. Output Pressure (psi) 100
Fluid to Air Ratio 1:1
Air Inlet Size 1/4" NPT(F)
Pump Inlet/ Outlet Size 1/2" BSPT(F)
Max. Pump Speed 400 cpm
Fluid Section Material Acetal
Centre Section Material Polypropylene Remote
Porting Acetal Standard Porting (BSP)
Seats Stainless Steel
Balls PTFE
Diaphragms PTFE
Manifold O-Rings PTFE