Graco Husky 515 1/2" Air-Operated Double Diaphragm Pump - D4A211
SKU
D4A211
$1,165.24 $971.03
Overview
Acetal Fluid Section, Polypropylene Remote Centre Section, Acetal Seats, PTFE Balls, PTFE Diaphragms, PTFE O-Rings
1/2 Inch Positive Displacement Double Diaphragm Pump
The Husky 515 has a 1/2 inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF
The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.
Benefits of the Husky 515 Double Diaphragm Pump
- Center and end porting options.
- No mechanical seals to cause fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
1/2 Inch Positive Displacement Double Diaphragm Pump
The Husky 515 has a 1/2 inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF
The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.
Features
- Fully-groundable acetal model
- Delivery up to 15 gpm (56.7 lpm)
- Easy-to-service air valve and ball checks
- Reliable air valve for years of dependable performance
Benefits
- Center and end porting options.
- No mechanical seals to cause fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
- Split manifold option to pump multiple fluids without mixing
Performance
Overview
| Maximum Fluid Flow: | 15 gpm (57 l/min) |
| Maximum Fluid Discharge Pressure: | 100 psi (7 bars, 0.7 MPa) |
| Maximum Size Pumpable Solids: | 3/32 in (2.5 mm) |
| Fluid Displacement Per Cycle: | 0.04 g (0.15 litres) |
| Max. Flow Rate (l/min) | 26.5 |
|---|---|
| Max. Input Pressure (psi) | 100 |
| Max. Output Pressure (psi) | 100 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 1/4" NPT(F) |
| Pump Inlet/ Outlet Size | 3/8" NPT(F) |
| Max. Pump Speed | 330 cpm |
| Fluid Section Material | Polypropylene |
| Centre Section Material | Polypropylene |
| Porting | Polypropylene Standard Porting (BSP) |
| Seats | Acetal |
| Balls | PTFE |
| Diaphragms | PTFE |
| Manifold O-Rings | PTFE |
Write Your Own Review
