The Husky 3300 has a 3 inch (76.2 mm) connection and is available in aluminum, polypropylene and stainless steel.
The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.
| Maximum Fluid Flow: | 300 gpm (1135 lpm) |
| Maximum Fluid Discharge Pressure: | 100 psi (7 bars, 0.7 MPa) |
| Maximum Size Pumpable Solids: | 1/2 in (13 mm) |
| Fluid Displacement Per Cycle: | 2.9 g (11 litres) |
| Max. Flow Rate (l/min) | 1,059 |
|---|---|
| Max. Input Pressure (psi) | 100 |
| Max. Output Pressure (psi) | 100 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 3/4" NPT(F) |
| Pump Inlet/ Outlet Size | 3" Flange (Centre) |
| Max. Pump Speed | 97 cpm |
| Fluid Section Material | Polypropylene |
| Centre Section Material | Polypropylene Standard Air Valve (NPT) |
| Porting | Polypropylene Centre Flange ANSI/DIN |
| Seats | Polypropylene |
| Balls | FKM (Flouroeleastomer) |
| Diaphragms | FKM (Flouroeleastomer) |
| Manifold O-Rings | PTFE |
