The Husky 2150 has a 2 inch (50.8 mm) connection and is available in polypropylene, aluminum, SST and iron.
The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
| Maximum Fluid Flow: | 150 gpm (568 l/min) |
| Maximum Fluid Discharge Pressure: | 120 psi (8 bars, 0.8 MPa) |
| Maximum Size Pumpable Solids: | 1/4 inch (6.3 mm) |
| Fluid Displacement Per Cycle: | 1.03 g (3.9 litres) |
| Max. Flow Rate (l/min) | 568 |
|---|---|
| Max. Input Pressure (psi) | 120 |
| Max. Output Pressure (psi) | 120 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 1/2" NPT(F) |
| Pump Inlet/ Outlet Size | 2" NPT(F) |
| Max. Pump Speed | 145 cpm |
| Fluid Section Material | Aluminium |
| Centre Section Material | Aluminium Standard Air Valve w/Buna Seals |
| Porting | Aluminium Standard Porting (NPT) |
| Seats | Santoprene |
| Balls | Santoprene |
| Diaphragms | Santoprene |
| Manifold O-Rings | PTFE |
| Certification Required | ATEX |
