Graco Husky 1050HP 1" Air-Operated Triple Diaphragm Pump - 24X389

    SKU
    24X389
    £5,250.60 £4,375.50
    Overview
    Stainless Steel Fluid Section, Aluminium Standard Air Valve w/Buna Seals Centre Section, Stainless Steel (316) Seats, Stainless Steel (316) Balls, PTFE Diaphragms, PTFE O-Rings

    1 inch Air-Operated Triple Diaphragm Pump

    The Husky 1050HP has a 1 inch (25.4mm) connection and is available in aluminum and stainless steel. Choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve.

    The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design; make this one of the most unique high pressure diaphragm pumps on the market.


    Features

    • Increased fluid pressure without sacrificing flow
    • Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
    • Reduce air consumption up to 50% with the low pressure mode
    • Same repair parts as our Husky 1050 air-operated double diaphragm pump reduces inventory levels
    • Application areas: Filter press, ceramic, high head pressure or long distance

    Benefits

    • Increased fluid pressure without sacrificing flow
    • Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
    • Reduce air consumption up to 50% with the low pressure mode
    • Same repair parts as the Husky 1050 diaphragm pump

    Performance

    Overview

    Maximum Fluid Flow:50 gpm (189 l/min)
    Maximum Fluid Discharge Pressure: 125 psi (17.2 bars, 1.72 MPa)
    Maximum Size Pumpable Solids: 1/8 in (3.2 mm)
    Fluid Displacement Per Cycle:0.2 g (0.76 litres)
    More Information
    Max. Flow Rate (l/min) 189
    Max. Input Pressure (psi) 125
    Max. Output Pressure (psi) 250
    Fluid to Air Ratio 2:1
    Air Inlet Size 3/4" NPT(F)
    Pump Inlet/ Outlet Size 1" BSPT(F)
    Max. Pump Speed 280 cpm
    Fluid Section Material Stainless Steel
    Centre Section Material Aluminium Standard Air Valve w/Buna Seals
    Porting Stainless Steel Standard Porting (BSPT)
    Seats Stainless Steel (316)
    Balls Stainless Steel (316)
    Diaphragms PTFE
    Manifold O-Rings PTFE
    Certification Required ATEX
    Write Your Own Review
    You're reviewing:Graco Husky 1050HP 1" Air-Operated Triple Diaphragm Pump - 24X389