SKU
24W759
£4,084.20 £3,403.50
Overview
Stainless Steel Fluid Section, Aluminium Standard Air Valve w/Buna Seals Centre Section, Stainless Steel (316) Seats, Santoprene Balls, Santoprene Diaphragms, PTFE O-Rings
1 inch Air-Operated Triple Diaphragm Pump
The Husky 1050HP has a 1 inch (25.4mm) connection and is available in aluminum and stainless steel. Choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve.
The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco’s low-high pressure mode valve. High pressure operation isn’t always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design; make this one of the most unique high pressure diaphragm pumps on the market.
Features
- Increased fluid pressure without sacrificing flow
- Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
- Reduce air consumption up to 50% with the low pressure mode
- Same repair parts as our Husky 1050 air-operated double diaphragm pump reduces inventory levels
- Application areas: Filter press, ceramic, high head pressure or long distance
Benefits
- Increased fluid pressure without sacrificing flow
- Low-high pressure mode valve lets you operate the pump as a standard AODD or a high pressure AODD
- Reduce air consumption up to 50% with the low pressure mode
- Same repair parts as the Husky 1050 diaphragm pump
Performance
Overview
Maximum Fluid Flow: | 50 gpm (189 l/min) |
Maximum Fluid Discharge Pressure: | 125 psi (17.2 bars, 1.72 MPa) |
Maximum Size Pumpable Solids: | 1/8 in (3.2 mm) |
Fluid Displacement Per Cycle: | 0.2 g (0.76 litres) |
Max. Flow Rate (l/min) | 189 |
---|---|
Max. Input Pressure (psi) | 125 |
Max. Output Pressure (psi) | 250 |
Fluid to Air Ratio | 2:1 |
Air Inlet Size | 3/4" NPT(F) |
Pump Inlet/ Outlet Size | 1" BSPT(F) |
Max. Pump Speed | 280 cpm |
Fluid Section Material | Stainless Steel |
Centre Section Material | Aluminium Standard Air Valve w/Buna Seals |
Porting | Stainless Steel Standard Porting (BSPT) |
Seats | Stainless Steel (316) |
Balls | Santoprene |
Diaphragms | Santoprene |
Manifold O-Rings | PTFE |
Certification Required | ATEX |
Write Your Own Review