Graco Husky 1050 1" Air-Operated Double Diaphragm Pump - 649052
SKU
649052
$1,684.74 $1,403.95
Overview
Polypropylene Fluid Section, Polypropylene Standard Air Valve (NPT) Centre Section, PTFE Balls, PTFE Diaphragms, O-Rings
1 Inch Positive Displacement Double Diaphragm Pump
The Husky 1050 has a 1 inch (25.4 mm) connection and is available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless steel and hastelloy.
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Features
- 30% more efficient than the market leader
- 20% increase in fluid flow compared to the Husky 1040
- Up to 5 times longer diaphragm life compared to other double diaphragm pumps in its class
- Expanded material offering to handle endless applications
Benefits
- Up to 5 times longer diaphragm life compared to other air-operated diaphragm pumps in its class.
- Expanded material offering to handle endless applications.
- Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation.
- Offered in ATEX configuration.
Performance
Overview
| Maximum Fluid Flow: | 50 gpm (189 lpm) |
| Maximum Fluid Discharge Pressure: | 125 psi (8.6 bar, 0.86 MPa) |
| Maximum Size Pumpable Solids: | 1/8 in (3.2 mm) |
| Fluid Displacement Per Cycle: | 0.17 g (0.64 liters) |
| Max. Flow Rate (l/min) | 189 |
|---|---|
| Max. Input Pressure (psi) | 125 |
| Max. Output Pressure (psi) | 125 |
| Fluid to Air Ratio | 1:1 |
| Air Inlet Size | 1/2" NPT(F) |
| Pump Inlet/ Outlet Size | 1" Flange (End) |
| Max. Pump Speed | 280 cpm |
| Fluid Section Material | Polypropylene |
| Centre Section Material | Polypropylene Standard Air Valve (NPT) |
| Porting | Polypropylene End Flange ANSI/DIN |
| Seats | PVDF |
| Balls | PTFE |
| Diaphragms | PTFE |
Write Your Own Review
